|
FAQ Statement
These are some of the most frequently asked questions over or TECH LINES. I hope these help.If you question is NOT answered below please feel free to e-mail your questions to us at Info@microtouchinc.com.
Rev-Limiters
Question 1 What is a Rev-Limiter?
Answer: A Rev-Limiter is designed to keep the engine from over revving.
Question 2 How do I set my Rev-Limiters Settings?
Answer: The main porpose is to have the rev-limiter set to the lowest setting without engagement in mild to rough water operation. When the watercrafts pump cavitates or leaves the water over a wave the engines rev-limter should engage slowing the engines rpm’s down.
WaterControllers
Question 1 What is a WaterController
Answer: A Watercontroller switch was designed to turn on a 12 volt solenoid at 12 volts and a preset engine Rpm.
Question 2 How do I adjust mt Watercontroller?
Answer: Ride the watercraft and adjust as much water ON until you can feel the hesitation were the water is turning off.
Relay
Question 1 What is an ECFP switch do?
Answer: A ECFP switch was designed to turn on up to 6amp at 12 volts and a preset engine Rpm.
|
